Toto SOIRÉE TS960A Manual De Instrucciones Y Del Propietario página 4

SHOWERHEAD INSTALLATION
Hex Wrench
Set Screw
Shower Assembly
NOTE: Thoroughly clean and remove debris from the water supply pipe before installation to
prevent clogging the spray outlet.
■ Remove the set screw and slide the adapter out from the shower arm. Take care not to damage
the O-ring.
■ Wrap adequate amount of pipe tape around the thread of the 1/2" NPT nipple. Install the nipple to
the elbow. Make sure the 1/2" NPT nipple extends between 3/8" to 7/8" beyond the finish wall.
■ Wrap pipe tape onto the thread of the nipple and then thread the adapter onto the nipple.
■ Slide the shower head assembly onto the adapter. Take care not to damage the O-ring.
■ Secure the showerhead assembly with set screw.
4
Pipe Connector with O-ring
Finished
Shower Wall
1/2" NPT Nipple
3/8"
Pipe connector
to 7/8"
with O-ring
N° Description
1 Adaptateur de tuyau avec joint torique
2 Vis de pression
3 Tuyau de douche
4 Articulation sphérique
5 Anneau
6 Régulateur de débit
7 Pomme de douche
4
5
6
7
21
2
1
3