Publicidad
Idiomas disponibles
Idiomas disponibles
Questions?
Before You Call for Service...
PROBLEM
TOP
BURNERS
DO
NOT
LIGHT
OR DO NOT
BURN
EVENLY
BURNER
FLAMES
VERY
LARGE
OR YELLOW
SURFACE
BURNERS
LIGHT
BUT
OVEN
DOES
NOT
POSSIBLE
CAUSE
• Malce sure electrical ptug is plugged
into a live power
oudeto
• Burner
holes on the side or around the top of burner
may be clogged,
Remove
burners
(on models
with standard
twin burners)
or burner
heads
(on models
with sealed burners)
or burner
caps on spill-proof
models,
and
clean them with a sewing
needle
or twist tie. Make
sure you do not enlarge
the holes° On spill-proof models, check electrode
area for burned-on
food or grease.
• Pilot(s)
is (are) not lit (on standing
pilot models).
See the Lighting
Instructions
for Standing
Pilot Models
section
in Surface
Cooldng.
• If range is connected
to I.P gas, check all steps in the Installation
Instructions.
The oven gas shut-offvalve
may have accidentally
been moved
during
cleaning
or moving.
To check the oven gas shut-offvalve
on standard
twin burner
models,
raise
the cooktop
und look for the gas shut-off
lever at the extreme
right rear
corner.
(Standing
pilot models
do not have a gas shut-offvalve
on the reg_ator.)
Follow
the directions
in box A or B that match
your
regulator
type.
_OWn
xPULL TO OPEN
;tandard Twin Burner Models
Lever shown ctosed /
Standard
Twin Burner Models
To check the oven gas shut-off
valve on sealed burner
models,
remove
the storage
drawer,
broiler
drawer
or kick panel
and look for the gas shut-
off lever at the back of the range.
Fo!low the directions in box A or B that match your regulator type.
A
_c!osed.
PULL/
Sealed Burner Models
Sealed Burner Models
44
Publicidad
