Important; Tool Use And Care; Repair And Service; Specific Safety Rules For Industrial Planers - Surtek CE716 Manual De Usuario

age supplied is the same as that one specified
on the nameplate of the tool. To use a not
specified voltage may cause a serious injury to
the user as well as damage the tool.
IMPORTANT: This appliance is not intended
for use by persons (including children) with re-
duced physical, sensory or mental capabilities
may be different or reduced, or lack of experi-
ence or knowledge, unless such persons are su-
pervised or trained to operate the product by
a person responsible for their safety. Children
should be supervised to ensure they do not use
the devices as toys.

TOOL USE AND CARE

• Do not force the power tool. Use the correct
tool for the application. The correct tool will
do the job better and more safely at the rate
that it was designed to work at.
• Use clamps or other practical way to secure
and support the workpiece to a estable plat-
form. Holding the work by hand or against
your body is unestable and may cause loss of
control.
• Do not use tools if switch does not turn it
on or off. Any tool that cannot be controlled
whith the switch is dangerous and must be re-
paired.
• Disconnect the plug from the power source
before making any adjustments, changing ac-
cessories or storing the tool. This preventive
safety measures reduce the risk of accidental
starting of the tool.
• When the power tool is not in use, store it
out of the reach of children, and do not al-
low individuals who are not familiar with the
power tool or these instructions to operate it.
Power tools are dangerous in the hands on un-
trained users.
• Maintain the power tool. Check for misalign-
ment or binding of moving parts, broken parts,
and any other condition that may affect the
operation of the power tool. If it is damaged,
have it repaired before using. Many accidents
are caused by poorly maintained power tools.
• Check for misalignment or bonding of mov-
ing parts, breakage parts, and any other condi-
tion that may affect the tools operation. If you
find a damaged tool, take it to service before
use it.
E N G L I S H •
• Use only accessories that are recommended
by the manufacturer of your model. Suitable
accessories for one tool, may become hazard-
ous when are used on another tool.
• Do not alter or misuse the tool. These tools
have been built by precision. Any alteration or
modification not specified is misuse and may
result in a dangerous condition.
• Is recommendable to use a safety device suit-
able, such a thermal and diferential switch
when you are using an electric equipment.

REPAIR AND SERVICE

• Tool service must be perfomed only by quali-
fied repair personnel. Service or maintenance
performed by unqualified personnel could re-
sult in a risk of injury.
• When tool service is required, use only identi-
cal replacement parts and follow the instruc-
tions from Maintenance Section in this manual.
The use of unauthorized parts or failure to fol-
low Maintenance Instructions may cause a risk
of electric shock or injury.
SPECIFIC SAFETY RULES
FOR INDUSTRIAL PLANERS
1. Serious personal injury may occur if normal
safety precautions are overlooked or ignored.
Accidents are frequently caused by lack of fa-
miliarity or failure to pay attention. Obtain
advice from supervisor, instructor, or another
qualified individual who is familiar with this
machine and its operations.
2. Every work area is different. Always consider
safe- ty first, as it applies to your work area.
Use this machine with respect and caution.
Failure to do so could result in serious personal
injury and damage to the machine.
3. Prevent electrical shock. Follow all electrical
and safety codes, including the National Elec-
trical Code (NEC) and the Occupational Safety
and Health Regulations (OSHA). All electrical
connections and wiring should be made by
qualified personnel only.
4. TO REDUCE the risk of electrical shock. DO
NOT use this machine outdoors. DO NOT ex-
pose to rain. Store indoors in a dry area.
5. STOP using this machine, if at any time you
experience difficulties in performing any op-
eration. Contact your supervisor, instructor or
machine service center immediately.
Us er ' s m anual
21