melitta CAFFEO SOLO&milk Manual De Instrucciones página 19

Display
Illuminated
Flashing
Illuminated
Flashing
Illuminated
Flashing
Illuminated
Flashing
Illuminated
Flashing
Illuminated
Flashing
Illuminated
Flashing
Illuminated
Flashing
BA_Solo_Milk_042015.indd 19 BA_Solo_Milk_042015.indd 19
The appliance is
ready for operation.
Appliance is heating
up or coffee is being
dispensed.
Change the Melitta
®
Claris water fi lter
®
Filter change in
process
Fill the water
reservoir.
Insert the water
reservoir
Empty drip tray
and coffee grounds
container
Insert the drip tray
and coffee grounds
container
1 bean: mild
2 beans: normal
3 beans: strong
Fill bean container;
fl ashing stops after
dispensing the next
coffee.
Clean the appliance
Integrated
cleaning programme
is running
Descale the
appliance
Integrated
descaling
programme is
running
Steam ready
Steam or hot water
dispensing underway
Before using for the fi rst time
General information
• Only use pure water without
carbonation.
• Use the supplied test strip to determine
the hardness of the water used and set
the water hardness („Water hardness
and fi lter", page 22).
Information for using for the fi rst
time
The appliance must be vented before
it is used for the fi rst time. To do so,
the appliance may only be switched on
without a Melitta Claris
®
with a completely fi lled water reservoir.
• Place a vessel under the steam pipe 12.
• Press the button to switch on
the appliance. illuminates on the
display.
• Turn the valve switch 11 clockwise until
the stop. fl ashes on the display.
Water will fl ow into the vessel.
• When is illuminated on the
display, turn the valve switch 11
counterclockwise until the stop.
• The appliance is ready for operation.
• After using the appliance for the fi rst
time, insert the Melitta
fi lter if required (see page 23).
water fi lter and
®
Claris water
® ®
19
20.04.2015 21:01:00 20.04.2015 21:01:00