Descargar Imprimir esta página

Starting Up The Appliance - melitta CAFFEO SOLO&milk Manual De Instrucciones

Ocultar thumbs Ver también para CAFFEO SOLO&milk:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 55

Starting up the appliance

Starting up
Warning!
Danger of fi re and electric shock
due to incorrect supply voltage,
incorrect or damaged connections
and power cable.
– Ensure that the supply voltage
corresponds to the supply voltage
specifi ed on the identifi cation label of
the appliance. The identifi cation label is
located on the right side of the appliance
behind the cover (Image A, 13).
– Make sure that the power socket meets
the applicable standards for electrical
safety. If in doubt, contact a qualifi ed
electrician.
– Never use damaged power cables
(damaged insulation, bare wires).
• Place the appliance on a stable, dry and
level surface with suffi cient clearance (at
least 10 cm) to the sides.
• Plug the power cable into a suitable
power socket.
• Remove the lid from the bean container
8.
• Fill the bean container with suitable
coffee beans.
• Put the lid back on.
• Lift up the lid of the water reservoir 7
and pull the water reservoir up and out
of the appliance.
• Fill the water reservoir with fresh tap
water only up to the max. mark.
• Insert the water reservoir into the
appliance.
• Place a vessel under outlet 2.
20
BA_Solo_Milk_042015.indd 20
BA_Solo_Milk_042015.indd 20
• Press the ON/OFF button
switch the appliance on or off. The
appliance performs an automatic rinse if
necessary.
Preparation
• Fill the water reservoir with fresh water
every day. The water reservoir must
always be fi lled with enough water for
the operation of the appliance.
• Fill the bean container preferably with
espresso beans or bean mixtures for
fully automatic coffee machines.
Do not use any glazed, caramelised or
otherwise sugar-coated coffee beans.
Setting the dispensed quantity and
strength
• Turn the coffee quantity regulator 4 to
infi nitely adjust the dispensed quantity.
Regulator all the way to the left = 30 ml
per cup
Regulator all the way to the right = 220
ml per cup
• Press the
button until the desired
strength is adjusted. The strength is
shown by the beans on the display 10
(from
= mild to
Dispensing coffee or espresso
One or two cups can be dispensed
simultaneously.
• Switch on the appliance.
• Place one or two cups under the outlet.
• Preparing one cup: Press the
button once
• Preparing two cups: Press the
button twice.
• Press the button again to cancel the
coffee dispensing.
to
= strong).
20.04.2015 21:01:00
20.04.2015 21:01:00

Publicidad

loading

Este manual también es adecuado para:

Caffeo solo & milk