Operation In Standard Mode; Use Without Remote Control - Oxypharm NOCOSPRAY 2 Manual Del Usuario

4.3

Operation in standard mode

EN
4.3.1
Steps Action
1
Plug in the NOCOSPRAY 2 power cable.
Set the power switch to "1".
2
Select the volume to be treated by sliding your finger over the pale
part of the keypad (*).
The selection range is between 10 m
(*) In standard mode, the volume selected by default is 10 m
3
The level is progressive: if two LEDs are illuminated, the intermediary
value is selected.
For example, if LEDs 10 and 20 are illuminated, the selected volume is
15 m .
3
4
To launch the device, press the button at the centre of the key pad
(press and hold).
5
A beep will sound for 15 seconds before the machine begins to
function.
Leave the room before the end of the
AT the end of diffusion, a beep will sound.
The device will stop automatically.
40

Use without remote control

3
and 1 000 m .
3
.
3
.
15 seconds
Illustration
15
S