7. EMC COMPLIANCE
EN
7.1
Cable length
Cables & accessories
Cables / Cords
7.2
Recommended separation distance
The medical device is intended for use in an electromagnetic environment in which disturbances due to RF
radiation are controlled.
The user or installer of the medical device can help to avoid elecromagnetic interference by maintaining a
minimum distance, depending on the maximum power of the radio frequency transmission equipment. RF
portable communications equipment (including peripherals such as antenna cables and external antennas)
should not be used closer than 30cm (12 inches) to any part of the UNIT TEST, including the cables specified by
the manufacturer. Otherwise, the performance of these devices may be impaired.
7.3
Electromagnetic emissions
Emission test
Electromagnetic radiation distur-
bances.
(Radiated emission)
(CISPR 11)
Terminal supply disturbance voltage
(Conducted emissions)
(CISPR 11)
Harmonics emissions
(IEC61000-3-2)
Voltage / Flicker test
(IEC 61000-3-3)
56
Length max.
Type of test
Emission RF
Harmonic currents emission
Voltage fluctuation and flickers
Electrostatic discharge immunity
Radiated immunity
Electromagnetic fields
Immunity to interference against fast
transient electrical disturbance/burst
<3 m
Immunity to fast transients
Conducted immunity
RF conduct interference
Radiated immunity
Magnetic fields
Immunity to volrage drops, short inter-
ruptions and voltage variations
Standard
Groupe 1
Classe B
N/A
N/A
In accordance with
CISPR 11, classe B
IEC 61000-3-2
IEC 61000-3-3
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
Electromagnetic environment
The Nocospray 2 uses RF energy only
for its internal function.
The Nocospray 2 is suitable for use in
all establishments, including domes-
tic establishments and those directly
connected to the public low voltage
power supply network that supplies
buildings used for domestic purposes.