Operation In Programmer Mode; Modus Operandi - Oxypharm NOCOSPRAY 2 Manual Del Usuario

Steps Action
4
EN Press the button on the remote control to launch
treatment.
5
A beep will sound for 15 seconds before the machine begins to
function.
Leave the room before the end of the
AT the end of diffusion, a beep will sound.
The device will stop automatically.
If necessary, the device may be stopped during treatment by pressing
the button on the remote control again.
Respect the safety information provided on page <EX>.
4.4

Operation in programmer mode

4.4.1
It is possible to use the NOCOSPRAY 2 with a programmer (not provided) in order to differ or repeat
treatments. Follow the procedure outlined below to select the programmer mode.
Steps Action
1
Plug in the NOCOSPRAY 2 power cable.
Set the power switch to "1".
44

Modus operandi

.
15 seconds
Illustration
15
S
Illustration