Cleaning - V.ORLANDI GS900 Instrucciones De Montaje

INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
1) The drawbar coupling needs to be cleaned after each journey,
whether a trailer was coupled up to the tractor or not, and, after
any repair and/or maintenance intervention;
2) The drawbar coupling must also be cleaned prior to first use
after long periods of non-use;
3) Open the safety cover bar as per steps 1 and 2 in the COUPLING
UP section 3.1 at page 12/24 herein and point an air jet directly
onto and around the drawbar coupling ball;
N
High pressure water cleaning must be strictly limited to the drawbar
O
T
coupling ball and safety cover areas.
E
GS900 DRAWBAR COUPLING

6 CLEANING

PAG.
22/24
CHAP. 6
REV. C