Replacing Rear Squeegee - American-Lincoln 56515851 Instrucciones De Uso

A-38 / ENGLISH
MAINTENANCE

REPLACING REAR SQUEEGEE

The squeegee will require service when the inner edge of the blades become round with wear, impairing the wiping action or water pick up.
1. Fig. 73. Loosen the four aluminum knobs (A).
2. Fig. 74. Remove the squeegee tool and turn upside down to service the blades or the caster wheels. The squeegee blades are
designed to rotate to use an unworn edge. Loosen the clamp bolts (B).
3. Install blades so that the outer blade is 3/16" longer than the inner blades. This is achieved by assembling the top edge of the blade
against the squeegee tool weldment.
4. Reinstall the squeegee clamp band and tighten the clamp bolt.
A-38 - FORM NO. 56041720 - 7730
FIGURE 73
FIGURE 75
FIGURE 74