American-Lincoln 56515851 Instrucciones De Uso página 7

MACHINE PREPARATION
3) Push machine down the ramp onto a fl at surface.
4) Install battery.
- Turn the key to the "O" position
- Lift the hood up and pull the battery lever up to the right.
- Use a battery lifting device with a 2000 LB. (907KG) capacity to place the battery into the battery tray.
- Push battery lever down to the left to lock the battery into place.
- Plug the battery power connector into the machine power connector.
- Lower the hood into place.
5) Charge battery as shown in the manual. Read battery manufacturer literature for battery care and maintenance.
WARNING!
Do not charge batteries on a concrete grounded surface. Hydrogen gas is formed during the charging operation and is explosive. Only
charge batteries in a well ventilated area with the lid open. Avoid any smoking, open fl ame, or electrical sparks.
UNPACKING BATTERY
The battery is shipped separately on a pallet wrapped in plastic as shown in fi gure 3. Remove the plastic and use a 2000 LB. (907KG) capacity
lifting device to lower the battery into the battery compartment as shown in fi gure 4.
FIGURE 3
ENGLISH / A-7
FIGURE 4
FORM NO. 56041720 - 7730 - A-7