TFA Dostmann 60.2521 Instrucciones De Uso página 13

TFA_No. 60.2521_Anleitung
Radio-controlled alarm clock with vibrating wristband
7.3 Setting of the alarm time
1. Alarm time
• Press the ALARM button once and enter the setting mode for the
first alarm time.
• ALARM 1 will be flashing on the display.
• Press and hold the ALARM button for two seconds.
• The alarm symbol appears on the display and the hour digit is flash-
ing.
• Press the ▲ or ▼ button to set the desired time.
• Confirm the setting with the ALARM button.
• Set the minutes in the same way.
• The alarm symbol for the alarm clock will be flashing.
• Confirm the setting with the ALARM button or press the ▲ or ▼
button to select between the different alarm types.
– Alarm symbol for the alarm clock (alarm tone)
– Alarm symbol for the wristband (vibration)
– Alarm symbol for the alarm clock and the vibrating wristband
– No symbol
• Confirm the setting with the ALARM button.
• Upon reaching the alarm time, an alarm tone and / or a vibration
(see: Radio-controlled vibrating wristband) will be triggered at the
set alarm time. The backlight turns on briefly.
• If the alarm is not stopped, the increasing alarm will automatically
turn off after 90 seconds and will be reactivated at the same time.
• You can stop the alarm by pressing any button.
• You can activate the snooze function by pressing the SNOOZE/LIGHT
button.
• Zz appears and the respective alarm symbol is flashing.
• The alarm tone and/or if adjusted the vibration will be interrupted
for 5 minutes.
24
21.06.2013 9:16 Uhr Seite 13
Radio-controlled alarm clock with vibrating wristband
• Press the ALARM button to activate or deactivate the alarm function.
• ALARM 1 will be flashing.
• Press the ▲ or ▼ button to activate or deactivate the alarm.
• The different alarm symbols appear/disappear on the display.
• Press the MODE button three times in the normal mode and you can
adjust the volume (VL) and the frequency (FQ) of the alarm tone.
• HI (default), AL und VL appear on the display.
• Press and hold MODE button.
• HI will be flashing.
• Press the ▲ or ▼ button to adjust the volume (LO/HI).
• Confirm the setting with the button MODE.
• HI (default), AL and FQ appear on the display.
• Press the ▲ or ▼ button to adjust the frequency.
• Confirm the setting with the MODE button.
• The volume adjustment display appears briefly on the display.
• The time also appears on the display.
2. Alarm time
• Press the ALARM button twice in normal mode to enter the setting
mode of the second alarm time.
• ALARM 2 will be flashing on the display.
• If necessary adjust the second alarm time in the same way.
7.4 Radio-controlled vibrating wristband
• The radio-controlled vibrating wristband works only if the person/
persons is/are in the same room as the alarm clock (Distance of the
radio-control is up to 10 m, free field)
• Take out the bracelet receiver.
• Check if the built-in accumulator (battery) is charged.
25