Tabla De Contenido; Leak Check - Coleman 9963 Serie Instrucciones De Uso

■ Install the cooking surface. (Fig. 3)
■ Install grease pan into position below
the grill from the rear side. (Fig. 4)
■ Turn off regulator
valve. (Fig. 5)
■ Screw regulator into grill hand tight.
(Fig. 6)
■ Remove
protective cap
from top of
propane cylinder.
Save cap for use
in storing.
(Fig. 7)
■ Screw propane
bottle into
regulator hand
tight. (Fig. 8)
■ Never operate
grill with propane
cylinder in an
inverted position.
(Fig. 9)
Fig. 3
Burner and Orifice
■ Proper location of the burner with
respect to the orifice is important.
To verify the proper installation of
the burner tube, remove the cooking
surface and the cooktop. The burner
tube, fuel tube, and orifice (on the
regulator) should be positioned as
shown in Fig. 10.
Fig. 4
Burner
Fig. 5
■ Check and clean the burner/fuel
tubes for insects and insect nests.
A clogged tube can lead to a fire
outside the appliance.

Leak Check

• Perform leak test outdoors.
• Extinguish all open flames.
• NEVER leak test when smoking.
Fig. 6
• Do not use the outdoor grill until
connection has been leak tested and
does not leak.
NOTE: Use Coleman
disposable propane cylinders. The
LP-gas supply cylinder to be used
must be constructed and marked in
accordance with the specifications for
Fig. 7
LP-gas cylinders of the U.S. Department
of Transportation (DOT) or the National
Standard of Canada, CAN/CSA B339,
Cylinders, Spheres and Tubes for the
Transportation of Dangerous Goods.
Fig. 8
English - 6
WARNING
16.4 oz.
®
Fig. 9
Orifice
Fuel
Tube
Fig. 10