REVERSING DRYER DOOR SWING (OPTIONAL)
Reverse Hinge
1. Use a small flat-blade screwdriver to remove two plug strips
from the inner door. Slide the head of the screwdriver under
the plugs, without scratching the inner door surface, and lift
up the strip.
2. Remove the four screws that attach to inner door hinge.
3. Move hinge to other side. Reinstall four screws.
4. Reinstall plug strips on opposite side of the inner door.
5. Check for fingerprints on the glass. Clean if necessary.
32
Replace the Door Assembly
1. Place the inner door assembly inside the outer door assembly.
2. Reassemble the inner and outer door assemblies
with the six screws.
Reverse the Strike
1. Use a small flat-blade screwdriver to remove the plug
strip from the dryer door opening. Slide the head of the
screwdriver under the plugs, without scratching the dryer
surface, and lift up the strip.