Tools Needed; Parts Supplied; Tools And Parts - Whirlpool CGT9100GQ Instrucciones De Instalación

Tools Needed:

8" (203 mm)
or 10" (254 mm)
Pipe wrench
TORX T20 Security
®†
screwdriver or bit
Level
Caulk gun and caulk
(for installing new exhaust vent)
Flashlight (optional)

Parts Supplied:

Water inlet hoses (2)
Beaded tie strap
† TORX and T20 are registered trademarks of Acument Intellectual Properties, LLC.
®
8" (203 mm) or 10" (254 mm)
Adjustable wrench
that opens to 1" (25 mm)
1" (25 mm) Hex-head
socket wrench
Utility knife
Vent clamps
1/2" (13 mm) and 9/16"
(14 mm) Open-end wrenches
Inlet hose washers (4)
Drain hose/clamp

TOOLS AND PARTS

Flat-blade screwdriver
5⁄16" Socket wrench
1/4" (6 mm) Nut driver
Pipe-joint compound
suitable for gas type
Ruler or measuring tape
U-shaped hose form
Phillips screwdriver
Pliers
(that open to 1 / " [39 mm])
9
16
Locking pliers
27" (686 mm) Wood block
Transit bolt hole plug (4)
5