Whirlpool CGT9100GQ Instrucciones De Instalación página 33

2. Remove the strike using a Phillips screwdriver.
3. Insert the strike on the opposite side.
REVERSING DRYER DOOR SWING (OPTIONAL)
Reinstall the Door
1. Partially insert the third screw from the top, then slide the
hinge onto this screw while hooking the hinge into the front
panel hole. Reattach the door to the dryer front panel with
the remaining three screws.
2. Check for fingerprints on the glass. Clean if necessary.
3. Close the door and verify that it latches securely.
33