Quick Menu - Pulsar N450 Manual De Usuario

13 Discrete Digital Zoom
The riflescope allows you to quickly increase the basic magnification (please refer
to the "Digital zoom" line in the specifications table) by two times or four times,
as well as to return to the basic magnification. To operate the discrete digital
zoom, press successively the DOWN (10) button.
14

Quick Menu

The Quick menu allows to manage basic riflescope's settings
(display brightness and contrast, continuous digital zoom,
stadiametric rangefinder) and change zeroing distance (if several are
available) in the current shooting profile.
•
Enter the quick menu with a brief press of the М (9) button.
•
To toggle between the functions below, press briefly the M button.
•
To exit the quick menu press and hold down the М button.
•
Automatic exit takes place in 3 sec of inactivity (controls are not used).
Brightness – press briefly the UP (8) and DOWN (10) buttons to change display
brightness from 00 to 20.
Contrast - press briefly the UP (8) and DOWN (10) buttons to change display
contrast from 00 to 20.
Continuous Digital zoom
change digital zoom value from 1.0 to 4.0. Change step for digital zoom is 0.1.
•
Initial continuous digital zoom value is x1.0 if digital zoom is not active.
•
Initial continuous digital zoom value is х2.0 if digital zoom is 2x;
•
Initial continuous digital zoom value is х4.0 if digital zoom is 4x.
Notes. Full magnification is the product of the basic magnification value and
continuous digital zoom value. For example: the riflescope's basic magnification is
4.5х, continuous digital zoom value х2.7. Full magnification is 12. 1 x (4.5*2.7). Display
brightness and contrast settings are saved in the memory when the unit is turned off.
The stadiametric rangefinder
distance to an object being ranged (please refer to section 20 for more details).
Information on the actual profile and zeroing distance A100
was done in this profile (for example, profile A, zeroing distance 100m).
•
Toggle between available combination of profile and distance (if there are more
than one) zeroing distances with the UP (8) and DOWN (10) buttons.
•
This information is also shown in the status bar.
15 Main Menu
•
Enter the main menu with a long press of the М (9) button.
•
Press the UP (8) and DOWN (10) buttons to toggle between the main menu
options.
•
Main menu navigation is cyclical: as soon as the last menu option of the first tab
is reached, first menu option of the second tab starts.
•
Enter a submenu of the main menu with a brief press of the М button.
•
Exit the submenu with a long press of the М button.
12
- press briefly the UP (8) and DOWN (10) buttons to
— press the UP/ DOWN buttons to change
, at which zeroing