Device Information - Pulsar N450 Manual De Usuario

•
With the UP/DOWN buttons select the time period (1 min, 3 min, 5 min) upon
expiry of which the riflescope will automatically shut down. Select "Off" if you
wish to deactivate Auto shutdown.
•
Confirm your selection with a brief press of the M button.
Note: if the function is activated, respective icons on the status bar show the
status of the function:
Function "Side incline"
This option allows you to activate/deactivate the side (horizontal) incline of the
weapon.
Side incline is indicated by "sector" arrows on the edges of the horizontal line
of the reticle. Arrows show the direction in which you should move your rifle to
eliminate side incline.
There are three modes of side incline:
5°-10° - one sector arrow;
10°-20° - two sector arrow;
>20° - three sector arrow.
A side incline of less than 5° is not shown on the display.
•
Hold down the M (9) button to enter the main menu.
•
Select menu item "Sensors" with UP (8) and DOWN (10) buttons. Press briefly M
to confirm.
•
Press briefly the M button to enter the submenu.
•
Select submenu "Side incline" with UP (8) and DOWN (10) buttons. Press briefly
M to confirm.

Device information

•
Hold down the M (9) button to enter the main menu.
•
Select menu item "Device information" with UP (8) and DOWN (10) buttons.
Press briefly M to confirm.
This option allows the user to view the following information about the riflescope:
•
Full name
•
SKU number
•
serial number
•
software version
•
hardware version
•
service information
20
1 min.