Password Setup - Pulsar N450 Manual De Usuario

Wi-Fi settings
This menu option allows you to set up your riflescope for operation in a Wi-Fi
network.

Password setup

This submenu allows you to set a password to access your riflescope from an
external device.
•
The password is used to connect an external device (i.e. smartphone) to your
riflescope.
•
Hold down the M (9) button to enter the main menu.
•
Select submenu with UP (8) and DOWN (10) buttons.
•
Press briefly the M button to enter submenu . Press briefly M to confirm.
•
The default password "12345678" appears on the display.
•
Set the desired password with the UP and DOWN buttons (button UP to increase
value; button DOWN to reduce). Switch between digits with a brief press of the
M button.
•
Save the password and exit the submenu with a long press of the M button.
Access level setup
This submenu allows you to set required access level of the Stream Vision
application to your riflescope.
Access level Owner. The Stream Vision user has the complete access to all
riflescope's functions.
Access level Guest. The Stream Vision user has the access only to the real time
video stream from the riflescope.
•
Hold down the M (9) button to enter the main menu.
•
Select submenu with UP (8) and DOWN (10) buttons.
•
Press briefly the M button to enter the submenu.
•
Set the desired access level with the UP and DOWN buttons.
•
Save your selection and exit the submenu with a long press of the M button.
Tab 2
Settings
The following settings are available:
Interface language selection
•
Hold down the M (9) button to enter the main menu.
•
Select submenu "General settings" with UP (8) and DOWN (10) buttons.
•
Press briefly the M button the enter the submenu "Language".
•
Select one of the available interface languages with a brief press of the UP/
DOWN buttons: English, French, German, Spanish, Russian.
•
Switch between languages with a brief press of the M button.
•
Save selection and exit the submenu with a long press of the M button.
17