Key Functions; User Mode; Product Name - Nuova Simonelli MicroBar Instrucciones De Manejo

• Once the ejection cycle is over, the unit will
enter resting phase position and the display
will show the first item on the programming
menu:

KEY FUNCTIONS

▲▼ : Scrolling function list
Programmable and/or decreasing /
increasing values.
ENTER: To enter menus/ submenus and con-
firming data.
RESET: Moving back to preceding level. e
confirming data
7.3
EXITING
PROGRAMMING
To exit programming sites, proceed as follows:
NOTE: Can be performed with machine on and
from any of the visualized functions.
• Insert the key into the appropriate lock.
• Turn the control panel hatch key counter-
clockwise.
• Open the control panel hatch; the display
will read:
• Close the front panel and turn the key clock-
wise. The display will read:
To switch the machine on definitively, press
the "ENTER" key:
• Alternatively, scroll through all the functions
using the ▼ key until the display reads:
7.4
PROGRAMMING CYCLE

USER MODE

1. CUMULATIVE TOTAL
The submenus can be entered by push-
ing the ENTER key.
The quantity of doses delivered for each
kind of beverage will be displayed.
1 Total Ristretto
2 Total 2 Ristretto
3 Total Espresso
4 Total 2 Espresso
5 Total Cafee
6 Total 2 Cafee
7 Total Cafecream
8 Total Latte
9 Total Caffelatte
10 Total Macchiato
11 Total Cappuccino
12 Total Big Cappuccino
13 Total Deca
14 Total Cleaning
15 Total Litres
The arrow keys ▲▼ scroll all the totals of the
various beverages.
The RESET key moves back to the preceding
menu.
Holding down the ▼ key shows the absolute total
number of doses produced by the machine.
Per azzerare i conteggi, premere contempo-
raneamente i tasti ▲▼.
The display will read "Counters reset".

2. PRODUCT NAME:

By pressing the ENTER key, the sub-
menus can be accessed.
A beverage is assigned to each key.
Example:
In this case the beverage 'Espresso' is
assigned to key number .
1
The arrow keys ▲▼ scroll the names of the
beverages on each key available in the agenda.
The RESET key is for exiting the submenu.
The ENTER key confirms the type of beverage
for the key number being taken into considera-
tion, and then passes on to the beverage of the
next key.
The programmable keys are the following:
1 2 3 4
Once the programming of the final key has
been completed, you pass on to the next menu
item.
2 4
NOTA: The keys
can be programmed for both milk-
based and coffee drinks.
6
6
53