— 2 0 —
Watches with a softiron inner case provide a higher level of pro-
tection against magnetic fields and far exceed the requirements
of DIN standard 8309. Nevertheless, it is still possible for the
watch movement to become magnetized in close proximity to
very strong magnets. We therefore recommend that watches with
a softiron inner case also be kept away from direct contact with
strong magnets.
Should there be a sudden change in the precision of your time-
piece, please contact an authorized IWC Official Agent to have
your watch checked for magnetism.
WAT E R - R E S I STA N C E
The waterresistance of IWC watches is stated in bar and not
in metres. Metres, which are often used elsewhere in the watch
industry to indicate waterresistance, cannot be equated with dive
depth because of the test procedures that are frequently used.
Waterresistance shown in metres provides no indication as to
actual use of the watch in the presence of moisture and wet-
ness, and in or under water. Recommendations for use in connec-
tion with the waterresistance of your watch can be found on the
D A V I N C I A U T O M A T I C
— 2 1 —
Inter net at www.iwc.com/waterresistance. Your authorized IWC
Official Agent will also be pleased to provide you with information.
To ensure that your watch stays properly waterresistant, you
should have it checked by an IWC service centre at least once a
year. Your watch should also be tested after exposure to unusual
ly harsh conditions. If the tests are not carried out as stipulated,
or if the watch is opened by unauthorized persons, IWC will ac-
cept no warranty or liability claims.
Recommendation: Your authorized IWC Official Agent must carry
out a waterresistance test whenever your IWC watch is opened
and serviced.
N OT E
If your watch has a strap made of leather, textile or rubber with
a leather or textile inlay, make sure that the highquality strap
does not come into contact with water, oily substances, solvents,
cleaning agents or cosmetic products. This way you can prevent
discoloration and premature ageing of the material.
D A V I N C I A U T O M A T I C