CAMPAGNOLO 11s Manual Del Usuario página 35

Note
In order to minimize the possibility of
damaging the chain irreparably, DO NOT
TIGHTEN the tool beyond the beat. Let the
bushing ULTRA-LINK CN-RE500 (E) protru-
Internal side
of the chain
de 0.1 mm from the inner side of the chain
(Fig. 14).
• Insert the protruding part of the guide into
the hole provided at the base of the tool and
split it by bending (Fig. 15).
E E
The terminal part of the split guide must
0,1 mm
always remain inside the bushing.
• Remove the clamping device and remove
14
the chain from the tool.
15
35
ENGLISH