Filter Cleaning And Replacement; Changing The Motor Protection Filter; Cleaning The Appliance - SOLAC AB28 Serie Instrucciones De Uso

Beagle.book Page 13 Thursday, August 6, 2009 9:02 AM
2 To change the dust bag (7), unplug the vacuum cleaner and proceed as follows:
• Press the dust bag button (5) and lift the cover.
• Remove the dust bag frame completely (8), pressing on the tab that holds the bag in
place to release it and put it in the rubbish bin. Fig. 4
3 Insert the new bag into the frame (8). Clip the card on the new bag with the tab. Slide
the bag frame along the bottom guide as far as possible. It is very important for the bag
to be fitted correctly. Make sure that once the bag has been fitted in the frame the hole
in the bag coincides completely with the bag support hole. Fig. 5
4 Close the bag compartment cover.

The vacuum cleaner is fitted with a safety mechanism that prevents the top cover from
closing if no dust bag has been fitted or if it is fitted incorrectly. In this case, it is
important not to force the cover.

FILTER CLEANING AND REPLACEMENT


We recommend that you periodically check the air filters to make sure that they
work correctly. Clean the filters if you detect that the appliance's suction
capacity has decreased.

Changing the motor protection filter (9)


Always unplug your vacuum cleaner before cleaning or changing the filters.
1 When the motor protection filter (9) is dirty (once or twice a year, depending on use),
open the vacuum cleaner, pressing the dust bag button (1), and lift the cover.
2 Remove the filter (9) by pulling the top upward. Shake the motor protection filter (9) well
or wash it if it is very dirty, and allow it to dry completely. Fig. 6

Important: Do not use the vacuum cleaner without the motor protection filter or if the
motor protection filter is not completely dry under any circumstances.
Changing the air outlet filter (16)

Always unplug your vacuum cleaner before cleaning or changing the filters.
Depending on the model of your vacuum cleaner, it has a different air outlet filter fitted
as standard:
- HEPA filter.
The HEPA filter (high efficiency of micro-particles in the air) eliminates particles of more
than 0.3 microns, filtering dust, pollen, fumes, spores and even bacteria.
- Micro-filter.
1 It is important to change or clean the air outlet filter at least once a year to maintain
suction power and conserve the vacuum cleaner correctly. You can note down the date
on which you began to use the filter on the air outlet filter support. There is a space for
this purpose on the filter support itself.
2 To remove the air outlet filter (16), remove the air outlet grille by pressing the tab down
and pulling the filter out. Fig. 7

Important: Do not use the vacuum cleaner without the dry air outlet filter fitted under
any circumstances.

CLEANING THE APPLIANCE


Clean the appliance before using it for the first time, immediately after each use and
after not using it for a long period of time. You will thus ensure the correct operation of
the appliance and prolong its useful life.

Before cleaning the appliance, unplug it from the mains.

Check that no water gets into the appliance.
1 Clean the outside of the appliance with a damp cloth. Do not use any abrasive products
or solvents.
CLEANING AND CONSERVATION
en
13