Declaration Of Conformity - Nice SLIGHT Instrucciones Y Advertencias Para La Instalación Y El Uso

and declaration of incorporation of partly completed machinery
Declaration in accordance with the following Directives: 2004/108/EC (EMC); 2006/42/EC (MD) annex II, part B
Note - The content of this declaration corresponds to the declaration at the last available version of the document filed in the offices of
Nice S.p.A. prior to the printing of this manual. The text herein was re-adapted for editorial reasons. A copy of the original declaration can
be requested from Nice S.p.A. (prov. of Treviso – Italy)
Declaration number: 473/SLH400
Manufacturer's name:
Address:
Person authorized
to provide technical
Technical documentation: Nice s.p.a.
Type of product:
Model / Type:
Accessories:
The undersigned Mauro Sordini, as Chief Executive Officer, hereby declares under his own responsibility that the product
identified above complies with the provisions of the following directives:
• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the
approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/
EEC, in accordance with following harmonised standards: EN 61000-6-2:2005, EN 61000-6-3:2007+A1:2011
In addition, the product conforms to the following directive in accordance with the provisions applicable to partly completed
machinery:
• Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of May 17 2006 regarding machines and
amending directive 95/16/EC (consolidated text)
• I hereby declare that the pertinent technical documentation has been drafted in accordance with Annex VII B of Direc-
tive 2006/42/EC and that the following essential requirements have been fulfilled: 1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-
1.5.2- 1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11
• The manufacturer agrees to send the national authorities pertinent information on the partly completed machinery, in
response to a motivated request, without affecting its intellectual property rights.
• If the partly completed machinery is operated in a European country with an official language other than the language
used in this declaration, the importer must include a translation with this declaration.
• The partly completed machinery must not be operated until the final machine in which it is to be incorporated is declared
to conform to the provisions of Directive 2006/42/EC, if applicable.
The product also complies with the following standards:
EN 60335-1:2012
EN 60335-2-103:2003+A11:2009
The parts of the product which are subject to the following standards comply with them:
EN 13241-1:2003+A1:2011, EN 12445:2002, EN 12453:2002, EN 12978:2003+A1:2009
Oderzo, 24 June 2014
18 – English
CE MARK DECLARATION OF CONFORMITY
Revision: 1
NICE S.p.a.
Via Pezza Alta 13, Z.I. Rustignè, 31046 Oderzo (TV) Italy
Electromechanical gear motor with incorporated control unit
SLH400
SMXI, SMXIS radio receiver; emergency battery: PS124
Language: EN
Ing. Mauro Sordini
(Chief Executive Officer)