Package contents
- CANICALM Excel collar fitted with strap and short contact points
- Lithium 3-V CR2 battery
- magnetic key
- neon test lamp
- pair of long contact points
- this user's guide
Description of the product
Contact points
(short or long)
Diagram 1
Button for barking
detection sensitivity
adjustment
Fitting the battery in the collar
Proceed as follows:
- Unscrew the battery cover using a coin.
- Insert the battery paying attention to follow polarity indicated under the collar (see Diagram 2).
- Retighten the battery cover using a coin. A beep sound is emitted indicating the correct installation
of the battery. If you do not hear any beep sound when retightening the battery cover, remove the
battery immediately from its housing. Check the polarity before trying again.
Bark detection contact
point
Indicator light:
On/Off indicator
+
Battery level indicator
Red mark:
magnet position indicator
This magnet allows to
switch On/Off the collar
and to change operating
mode.
Battery cover
Battery polarity
indicator
WARNING
When inserting the battery, make
sure to follow polarity indicated on
the collar.
Gb - 14
Diagram 2