Joovy Qool Manual De Instrucciones página 10

Installing/Removing the Seat
• Seat brackets can be placed in the rear (higher) or middle (lower) position on the stroller frame. (7)
• Slide the seat brackets onto the stroller frame at the desired height until they click into place. (8)
Both seat brackets must be at the same height.
• Place the seat on the stroller so that the male brackets on the bottom of the seat line up with the
female brackets on the stroller frame.
• Push down on both sides of the seat until both sides snap into place. (9) Pull up on the seat on
both sides to ensure it is secure.
• The seat can be placed on the stroller forward-facing or rear-facing. (10)
• To remove the seat, push both round buttons on both sides of the seat and pull away from the
stroller. (11)
• To remove the seat brackets when changing the seat into another seat location, push the lever
near the top and slide the bracket off. (12)
• To use the seat in the front position, front adapters (sold separately) must be installed. See
Optional Accessories for more information on usage.
7
9
10
8
10