Securing Your Child - Britax HIGHPOINTl MIDPOINT Guia Del Usuario

Britax Child Safety, Inc.
4� Attach the lower connectors�
a� Verify the lower anchor adjuster straps are not twisted�
b� Using the lower anchor farthest from you for easiest
positioning push the lower connectors onto their adjacent
lower anchors as shown�
NOTE: You may need to turn the back of the booster seat
towards you for easier access to the lower anchors.
c� A click confirms lower connectors are attached� Pull on lower
connectors to confirm a secure attachment�
IMPORTANT: If a click is not heard when connecting the
lower connectors, the lower anchor adjuster strap may
be twisted or there may be debris in the lower connector�
Correct either situation before continuing with the positioning
process�
5� Guide the booster seat into place while pulling the lower
connector adjuster strap on either side of the booster seat to
remove slack�
NOTE: Only tighten until the slack is removed from the lower
connector adjuster strap. Over-tightening the strap can force the
backrest of the booster seat forward�
18

Securing Your Child

1� Sit your child in the booster seat, ensuring that the child is sitting
upright and that their back is against the backrest� Check the
head restraint for proper height adjustment� The top of the head
restraint should be above the child's ears (see page 8)�
2� Pull the vehicle seat belt out and route the shoulder part of the
vehicle seat belt through the shoulder belt guide�
3� Route the lap part of the vehicle seat belt under the left and right
armrests and over both base belt guides�
NOTE: The shoulder part of the vehicle seat belt should be routed
under the armrest on the buckle side.
4� Verify the vehicle seat belt is not twisted and then fasten across
the child�
HIGHPOINT/MIDPOINT User Guide
19