Airwell DED076 Manual De Usuario página 15

Param
Parameter
eter
name
code
Entrance of
C00 adjustable
parameter
View the
project number
of indoor unit
C01
and locate the
faulted indoor
unit
View the
indoor unit
C03 quantity of the
system
network
Table 3.1 Parameters viewing list
Parameter
range
In "C00" status, Timer zone shows the
current indoor unit project number.
When one wired controller is
--
controlling multiple indoor units, then
only the smallest project number will be
displayed.
Operation method:
Enter viewing, press MODE button in
"C01" status to enter the interface of
viewing indoor unit project number.
Press "
project number of indoor unit.
Display method:
Temperature zone: displays error
codes of the current indoor unit( The
temperature zone will display the error
codes in turn with an interval of 3
seconds if there are several
1-255;
malfunctions in one indoor unit.)
Project number
Timer zone: displays present indoor
of online indoor
unit project number /C5 malfunction of
unit
project number conflict
Note:
1) If master indoor unit exists in current
indoor unit network, "MASTER" icon
will be bright under "C01" interface.
After entering the interface of viewing
project number, "MASTER" icon will be
bright only when the project number of
master indoor unit is selected.
2) System will not exit "C01" viewing
automatically. User has to exit this
interface manually.
Timer zone: display indoor unit quantity
1-80
of the system
12
User Manual Wired Controller
Viewing method
ng
" or " " or " " button to select t " button to select the