User Manual Wired Controller
4.6 SWING SETTING
In unit on status, up & down swing function and left & right swing function can be
set.
(1) Up & down swing function
Up & down swing function has two modes: simple swing mode and fixed-angle
swing mode. In unit off status, press "SWING" button and "
seconds to switch between simple swing mode and fixed-angle swing mode. Up &
down swing icon
1)When simple swing mode is set in unit on status, press "SWING" button to
start or stop up & down swing.
2)When fixed-angle swing mode is set in unit on status, press "SWING" button
to adjust swing angle circularly as below:
(2) Left & right swing function*:
Start left & right swing: In unit on status, press "FUNCTION" button to switch to left
& right swing function with left & right swing icon
"ENTER/CANCLE" button to start left & right swing. When left & right swing is activated,
left & right swing icon
Cancel left & right swing: When left & right swing is activated, press "FUNCTION"
button to switch to left & right swing with left & right swing icon
press "ENTER/CANCLE" button to cancel left & right swing.
4.7 QUIET SETTING
Quiet function consists of two kinds: QUIET and AUTO QUIET.
Press the Function button till the unit shows the quiet function setting state. Quiet
or Auto Quiet
or Auto Quiet
or Auto Quiet
Quiet and Auto Quiet and then press Enter/Cancel button to turn on this function.
In quiet mode, press the Function button till the unit shows the quiet function. In this
case, the Quiet
cancel this function.
The setting of Quiet function is as shown in fig. 4.
will blink during switching.
will be bright.
mark blinks. In this case, press
mark blinks. In this case, press
mark blinks. In this case, press
or Auto Quiet
or
or
or
icon
blinks and then press Enter/Cancel button to
.5:
21
" button together for 5
blinking, and then press
blinking, and then
button to switch between
button to switch between
button to switch between