Sime MURELLE HE 50 R Manual De Usario página 83

Type C (separate ø 80 flues)
TABLE OF LOAD LOSSES OF ACCESSORIES
90° MF polypropylene curve
45° MF polypropylene curve
Polypropylene extension L. 1000
Polypropylene extension L. 500
Coaxial roof exit terminal + Fitting (pos. 10)
Roof exit terminal L. 1381
Exhaust terminal
Air inlet terminal
Polypropylene extension L. 250 with socket
Coaxial exhaust L. 885 + Fitting (pos. 10)
Condensation recovery L. 135
KEY
1 90° MF polypropylene curve (6 pcs.) code 8077450
2 a Polypropylene extension L. 1000 (6 pcs.) code 8077351
2 b Polypropylene extension L. 500 (6 pcs.) code. 8077350
3 Hinged tile code 8091300
4 Roof terminal kit L. 1381 code 8091204
4 a Coaxial roof exit terminal code 8091205
5 Polypropylene extension L. 250 with socket code 6296513
6 45° MF polypropylene curve (6 pcs.) code 8077451
7 Exhaust terminal code 8089501
8 Internal-external ring nut kit code 8091500
9 Air inlet terminal (supplied with unit)
10 Inlet/exhaust fitting code 8091401
11 Rubber gasket ø 80 (supplied as standard)
12 Condensation recovery L. 135 code 8092800
13 Coaxial exhaust ø 80/125 L. 885 code 8091210
Type C (separate ø 80 flues and
Load loss
(mm H O)
2
Inlet Exhaust
0,80 0,80
0,45 0,45
0,35 0,45
0, 1 5 0,20
- 4,00
- 1,30
- 1,50
0,20 -
- 0, 1 0
- 5,00
1,80 -
WARNING:
- Installations with roof exit terminal (4a) and coaxial
exhaust (13) require the use of a condensation reco-
very (12) that has to be connected to the water drain
siphon (waste water).
- The installation of the roof exit terminal (4a) requires
the removal of the two ø 60 and ø 100 reducers.
- Before installing accessories, lubricate the internal
part of gaskets with silicon-based products. Avoid
using oils and greases.
coaxial exhaust terminal)
ES
PT
ENG
Fig. 7
83