Measurement; Procedure - Topcom BPM ARM 1600f Manual De Usuario

Topcom BPM Arm 1600f

10 Measurement

10.1 Procedure

10
1. Press the ON/OFF/START
button. All display segments will
appear for approximately one
second before returning to "0"
2. The unit will automatically inflate
to the appropriate inflation level
based on the user's pulse
oscillations. Measurement will
then begin.
To interrupt the measure-
ment, simply press any key.
The cuff will deflate immedi-
ately after a key is pressed.
During the measurement, do
not talk or move your arm or
hand muscles.
3. When the measurement is
completed,systolic, diastolic and
pulse will be shown
simultaneously and be saved
automatically in the memory
system. Up to 60 results can be
saved.
4. Press the ON/OFF/START
button to turn off the power. If no
button is pressed, the unit will
shut off automatically in 1
minute.
When a mistake was detected
during measurement the Error
mark appears on the display.