Digital multimeter for
-
Direct voltage measurements
-
Alternating voltage measurements
-
Direct current measurement
-
Alternating current measurement (BENNING MM 9/ 10)
-
Resistance measurement
-
Diode test
-
Continuity testing
-
Capacity measurement
-
Frequency measurement
Tableofcontents
. Usernotes
2. Safetynotes
3. Scopeofdelivery
4. Unitdescription
5. Generalinformation
6. Environmentconditions
7. Electricalspecifications
8. MakingmeasurementswiththeBENNINGMM8/9/0
9. Maintenance
0. Applicationofrubberprotectionframe
. T echnicaldataofthemeasuringaccessories
2. E nvironmentalnotice
. Usernotes
These operating instructions are intended for
-
Skilled electricians and
-
trained electronics personnel.
The BENNING MM 8/ 9/ 10 is intended for making measurements in dry
environment. It must not be used in power circuits with a nominal voltage
higher than 1000 V DC and 750 V AC (More details in Section 6. "Environment
conditions"
The following symbols are used in these operating instructions and on the
B ENNING MM 8/ 9/ 10:
Warning of electrical danger!
Indicates instructions which must be followed to avoid danger to
persons.
Important, comply with the documentation!
The symbol indicates that the information provided in the operating
instructions must be complied with in order to avoid risks.
This symbol on the BENNING MM 8/ 9/ 10 means that the
BENNING MM 8/ 9/ 10 is totally insulated (protection class II).
This symbol on the BENNING MM 9/ 10 indicates the built in fuses.
This symbol appears in the display to indicate a discharged battery.
This symbol designates the „diode test" range.
This symbol designates the „continuity test" range.
The buzzer is used for the acoustic result output.
This symbol designates the „capacity test" range.
(DC) Direct voltage or current.
(AC) Alternating voltage or current.
Ground (Voltage against ground).
11/ 2006
Operatinginstructions
B ENNINGMM8/9/0
B ENNINGMM8/9/10