CMT ORANGE TOOLS CMT900 Manual De Instrucciones página 15

SHELF SUPPORT DRILLING AA
Making joints longer than the drill
The procedure is shown in Fig. 7.
Once the edge stop (pos. 2) is removed, the template can be moved along the work piece edge.
The centering pins included in the CMT900 drilling template's basic kit are used to fix the last hole
and keep the 32mm spacing (pos. 3/4/5).
The pins supplied have a 5mm and 3mm diameter.
The procedure is the same as with the 0 stop; mechanism positioning on the drilled component
is ensured by the centering pin and two pins. To align the template with previously drilled holes,
position the two centering pins as far apart as possible.
Fig. 7
www.cmtorangetools.com
15