Descaling Procedure - Saeco Intelia Deluxe HD8906 Manual De Instrucciones

Descaling procedure

CALC
CLEAN
You can pause the descaling or rinsing cycle by pressing the ESC button.
The display will show the following icon. To continue the descaling or rinsing
cycle, press the OK button.
1 Remove and empty the drip tray. Slide the drip tray back into the
machine.
Remove the AquaClean water filter from the water tank (if present).
2 Fill the milk carafe with fresh water up to the MIN level. Insert the milk
carafe into the machine. Turn the dispensing spout of the milk carafe to
the 'I' position.
3 Press the OK button.
- The display shows the following icon to remind you have to place the
milk carafe in the machine.
4 The display shows the following icon to indicate that the machine enters
the descaling cycle. If you want to exit the descaling cycle, press the ESC
button.
5 Pour the entire bottle of Saeco descaling solution (250ml) into the water
tank.
6 Add water to the descaling solution in the water tank up to the CALC
CLEAN indication.
7 Place a large container (1.5 l) under the coffee and milk dispensing
spouts.
8 Press the OK button to start the descaling cycle.
- The machine dispenses the entire descaling solution at regular intervals
through the coffee and milk dispensing spouts (this takes approximately
25 minutes).
9 Let the machine dispense the descaling solution until the water tank is
empty. Remove and empty the container and the milk carafe.
10 Remove and empty the drip tray. Slide the drip tray back into the
machine.
11 Rinse the water tank and fill it with fresh water up to the CALC CLEAN
indication. Slide the water tank back into the machine.
12 Filll the milk carafe with fresh water up to the MIN level and place it back
into the machine. Place the container back under both spouts.
13 Press the OK button to start the rinsing cycle (this takes approximately 4
minutes).
English
21