Livestrong LS8.0E Manual Del Propietário página 13

lS8.0E ASSEMBLY STEp 2
lS8.0E SHOWN
NUTS (G)
SPRING WASHERS (F)
FLAT WASHERS (E)
GUIDE RAIL SET
BOLTS (J)
SPRING WASHERS (I)
FLAT WASHERS (H)
MANUAL INCLINE
LIFT LEVER
GUIDE RAIL SET
MANUAL INCLINE
LIFT LEVER
BOLTS (D)
MAIN FRAME
HARdWARE bAG 2 CONTENTS
BOLT (D) FLAT WASHER (E)
16 mm
35 mm
Qty: 4
Qty: 4
FLAT WASHER (H)
20 mm
Qty: 4
* This step is for LS8.0E only.
Open hardware bag 2.
A
Attach manual incline lift lever to guide
B
rail set using 4 bolts (d), 4 flat washers
(e), 4 spring washers (f) and 4 nuts (g).
Align guide rail set with main frame as
C
shown.
Lift up on the manual incline lift lever
D
and place it in one of the holes inside the main
frame.
Attach the guide rail set to the main frame
E
using 4 bolts (J), 4 spring washers (i) and
4 flat washers (h).
SPRING WASHER (F)
NUT (G)
15 mm
Qty: 4
Qty: 4
SPRING WASHER (I) BOLT (J)
18 mm 25 mm
Qty: 4 Qty: 4
LS8.0E
13