3.3 Device layout
The enclosure of the device has three parts and consists of
bottom part, top part and front panel.
The design of the front panel depends on the version of
the device.
Front view
Fig.: 3. Front view (example: with type 2 charging socket
for use with separate charging cable)
1.
Multi-function button
2.
LED Info bar
3.
Fastening screws for upper housing part
4.
Upper enclosure section
5.
Energy meter with inspection window
6.
Front panel
7.
RFID card reader
1)
8.
Type 2 charging socket with hinged lid
9.
Pre-cut recess for supply cable / cable duct
Optional
1)
6
1)
1)
Rear view
Fig.: 4. Rear view (example)
1.
Bottom part of enclosure
2.
Fastening screws for upper housing part
3.
Air outlet
4.
Recess for supply line / cable duct
5.
Fastening bores
6.
Cable glands
Interior view of front panel
Fig.: 5. Interior view of front panel (example: with type 2
charging socket for use with separate charging cable)
1.
Actuator
(plug interlock)
1)
2.
Type 2 charging socket with shutter
Optional
1)
1)