Menu "Whitelist - Mennekes AMTRON Xtra Manual De Instalación

Integration into the home network via WLAN
WLAN STA/Client Mode Settings
Value Description
Network Name / Input: Name of the home network
SSID
WLAN Key Input: WLAN password
Access Point If several WLAN access points are
BSSID (optional) available, the device switches between
the access points depending on the
reception. You can optionally enter
the BSSID of the access point here
to assign a fixed access point to the
device
Security Mode Selection: WLAN encryption.
Use Static IP  Use static IP address
Address  Do not use static IP address
Static IP Input: Static IP address
Address
Static Netmask Input: static network address
Static Gateway Input: IP address of the router
Address
The following data is displayed in the submenu "WLAN
Status":
„ Active WLAN Mode
„ Status Details
„ Broadcasting SSID
„ WLAN Channel
„ WLAN MAC Address
„ Connected Clients
„ WLAN IP Address
„ WLAN Subnet Mask

6.4.4 Menu "Whitelist"

The "Whitelist" menu is only displayed if an RFID
card reader is present in the device (in the versions
Premium (E/R/W)).
The whitelist entries for the RFID cards can be edited,
added or deleted in the "Whitelist" menu. The whitelist can
be exported or imported.
f Enter PIN3 (whitelist PIN).
Adding an RFID card
f In the "Whitelist" menu, select the submenu "Export".
General data
Value Description
Card Input: Desired name of the RFID card
Name
Unique Input: Number of the RFID card
ID
If the number of the RFID card is not
known, it can be read out via a card
reader.
Master RFID card is a master RFID card

RFID card is not a master RFID card

Optional Data
This data is only taken into account in the mode "Energy
Manager".
VALUE Description
Vehicle Phases Input: Number of phases of the vehi-
cle.
Min. Current per Input: Minimum charging current per
Phase phase
Max. Current Input: Maximum charging current per
per Phase phase
EN
25