Centre Delay; Pink Noise; Level Setting; Setting A Password - Clatronic DVD 619 HC Instrucciones De Servicio

Centre Delay

Again, selecting the correct Centre Delay depends on the
position of the centre speakers. If the distance between
the centre speaker to the listener is less than the distance
between the right and left front speaker to the listener, the
delay is balanced.
1. Press the SETUP button.
2. Use the cursor button to select the Audio, press the
ENTER button.
3. Use the cursor button to select Centre delay, then re-
peatedly press the ENTER button to select the desired
Centre Delay type. Your selection is highlighted on the
screen.
4. To exit the FUNCTION SETUP MENU and return to the
normal screen, press the RETURN button.

Pink noise

1. Press the SETUP button.
2. Use or button to select the Audio, press the
ENTER button.
3. Use or button to select Pink noise, and then press
the Enter button.
4. Use or button to select the desired setting, and
then press the ENTER button.
OFF: Pink noise is always switched off.
Left: Pink noise comes out from front left speaker
for testing.
Centre: Pink noise comes out from center speaker for
testing.
Right: Pink noise comes out from front right speaker
for testing.
Left sur: Pink noise comes out from rear surround left
speaker for testing.
Right sur: Pink noise comes out from rear surround right
speaker for testing.
Subwoofer: Pink noise comes out from subwoofer for
testing.

Setting a password

Some discs are programmed to edit out the playback of
entire individual scenes, or even the entire DVD (parental
lock). The parental lock can be set via the Set Up menu.
104
5....-05-DVD 619_GB 104
HOW TO USE
There are eight different levels. Level 1 is safe for kids'
viewing, Level 8 is for adult viewing only.
Level 1: Kid Safe
Level 2: G
Level 3: PG
Level 4: PG-13
Level 5: PG-R
Level 6: R
Level 7: NC-17
Level 8: Adult
To ensure that your children exclusively watch movies sui-
table for viewing by children, Levels 2-8 have to be locked.
You may access these discs via a password.
Rating setting
1. Press the SETUP button.
2. Use the cursor button to select Rating, press the
ENTER button.
3. Use the cursor button to select parental lock and then
press the ENTER button repeatedly to set the parental
locklevel.
4. Use or button to shift and select Password, enter
your 4-digit security code and then press the ENTER
button.
5. Press the ENTER button to exit the Set Up menu.
If you make a mistake before pressing the ENTER button,
press the CLEAR button and enter your 4-digit security
code again.
If the parental lock was set successfully the display will
indicate a closed lock. If no parental lock was set the lock
is displayed as open. After setting the level and password
only opened sectors can be viewed without entering the
password.
If you forget the password, you can erase your current
password by pressing number button 8 on the remote four
times, then press the ENTER button to confi rm the setting.
Indicates parental lock is NOT active.
The parental lock is active.
24.05.2004, 14:41:33 Uhr