Adjusting The Sound; Speaker Setting; Sound Quality; Dolby Digital - Clatronic DVD 619 HC Instrucciones De Servicio

Speaker setting

To set the surround sound with Pro Logic use the remote
control to perform the following changes to the speaker
balance:
Front speaker (left)
• Press the SOUND button repeatedly to display
5
, then press the cursor button to adjust the sound
level. It will show on the display of the Unit.
Front speaker (right)
• Press the SOUND button repeatedly to display
5
, then press the cursor button to adjustthe sound
level. It will show on the display of the Unit.
Center speaker
• Press the SOUND button repeatedly to display
10
, then press the cursor button to adjust the sound
level. It will show on the display of the Unit.
Rear speaker (left)
• Press the SOUND button repeatedly to display
L10
, then press the cursor button to adjust the sound
level. It will show on the display of the Unit.
Rear speaker (right)
• Press the SOUND button repeatedly to display
R10
, then press the cursor button to adjust the sound
level. It will show on the display of the Unit.
Subwoofer
• Press the SOUND button repeatedly to display
10
, then press the cursor button to adjust the sound
level. It will show on the display of the Unit.
Note:
• If you do not press any button within a few seconds,
the display will return to normal.
94
5....-05-DVD 619_GB 94

ADJUSTING THE SOUND

To adjust the sound quality
Press the Sound button to select an equalisation mode
(bass, treble). Press the cursor button to adjust the level.
Bass: the low range of sounds
LEFT
Treble: the high range of sounds

Dolby Digital

Dolby Digital is a sound system developed by Dolby
Laboratories Inc. that gives movie theatre ambience to
RIGHT
audio output when the Unit is connected to a Dolby Digital
5.1 channel processor or amplifi er. This Unit automatically
recognizes DVDs that have been recorded with Dolby
Digital.
As not all DVDs are recorded in this mode be sure they
CENT
feature this logo when purchasing a DVD.
REAR

Dolby Pro Logic II

This system guarantees the full band width of a two-chan-
nel system by using a surround decoder, and is marked by
REAR
the following symbol:
SUB
24.05.2004, 14:41:26 Uhr