Descargar Imprimir esta página

Num'axes EYENIMAL Manual De Instrucciones página 6

Ocultar thumbs Ver también para EYENIMAL:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 8
Maintenance
Disinfect the device and comb teeth after each use with a cloth soaked in 70% alcohol (be sure to turn the device off
during cleaning and wait to make sure it is completely dry before the next use).
READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.
1.
Hold the handle and open the battery compartment, insert the two "AA" batteries (see Figure 1), then put
the comb back together.
2.
Press the ON / OFF button on the side of the handle; you'll hear a buzz indicating that the comb is
working correctly and ready for use.
You have the option of using the device like a regular comb by leaving the "electronic comb" function
turned off.
3.
Keep a 45° angle between the comb and your pet's fur (see Figure 2 below) and avoid touching your
pet's eyes, ears or chops. The black rubber-coated fixtures on the teeth ends must be positioned on the
lower side of the fur. Move the comb slowly through the coat, preferably one zone at a time, for a more
efficient result. The brushing direction may be bottom to top or top to bottom, but be sure to maintain the
45° angle at all times.
Fleas typically begin to infest your cat or dog on the backside before working their way down the
back onto the abdomen, at which point they spread over the animal's entire body.
COMB USE INSTRUCTIONS
Fig. 1
Fig. 2

Publicidad

loading