Joie i-Gemm Manual De Instrucciones página 10

2. Unlock the buckle of the harnesses
by pressing the red button.
26
3. Place child into the infant carrier
module and lock the buckle.
27 28
4. Tighten the shoulder harnesses by
pulling adjustment webbing.
29
!
Make sure the space between
the child and the shoulder
harnesses is about the thickness
of one hand.
15
26
27
28 28
29
Detaching Hood and Seat Pad
To detach the hood, simultaneously
press the button in the hood mount
and pull the hood bow out.
30
To detach the seat pad, you should
refer to the following steps:
1. You must remove the insert first.
To do this simply unlock the
buckle, then unclip the snaps on
both sides of the insert and pull out
away from the seat.
2. The shoulder harness cover or
crotch harness cover can be
removed from the webbing.
3. Detach the elastic bands on the
back of head support to remove
the head support soft goods.
4. Pull out the fastening pieces
underneath the edge of the seat.
31
5. Detach the seat pad from around
the adjustment button as shown in
32
To re-assemble the soft goods,
reverse the aforementioned steps.
30
31
32
16