Forward Speed Of The Lawnmower; Turning Speed Of The Blades - pellenc Rasion Easy Guia Del Usuario

PRELIMINARY SETTINGS ON THE TOOL

FORWARD SPEED OF THE LAWNMOWER

This is a self-propelled mower. The motors drive the rear wheels and the lawn mower moves forward
by itself, you just need to steer. The driving power of this lawn mower offers considerable assistance in
effortlessly mowing gardens on a slope or tilt.
The four LEDs in the top of the control panel indicate the forward speed of the mower: 1, 2, 3 or 4. The
travel speed can be changed at any time before or after starting the mower's engine.
Forward speed: Forward acceleration
- Press the speed selector knob several times
successively (5) in order to change from speed 1 (1
km/h) to speed 2 (1.3 km/h), then to speed 3 (3.7
km/h) and finally to speed 4 (5 km/h).
Forward speed: Reverse acceleration
- Pressing on the forward speed selector knob (5) to
switch from speed 1 (1 km/h) to speed 2 (2 km/h).
Beyond that, the reverse speed will remain be 2 km/h
even if 3 or 4 LEDs are on.
For safety reasons the travel speed in reverse does not exceed 2km/h.

TURNING SPEED OF THE BLADES

The four LEDs in the lower part of the control unit are indicate the blade rotation speed: 1, 2, 3 or 4. The
blade rotation speed can be modified at any time, before or after starting the lawn mower's motor.
- Perform several successive presses on the blade
rotation speed selector knob (6) to go from the
automatic speed to speed 1 (3000 rpm), speed 2
(4000 rpm) and finally to speed 3 (5000 rpm).
14
5
6