Tabla de contenido
Publicidad
DU.350V
• Do not stand in the movement area of the door.
• Do not let children play with controls and near the door.
• Should operating faults occur, do not attempt to repair the fault but call a qualified technician.
As all other Benincà automatisms, the DU.350V is featured by a simple and functional release which permits
the manual move in case of electricity interruption.
Proceed as follows:
- Extract the plastic plug T by levering on the edge
- Insert the key C and turn it.
- While keeping the key turned push the wing until it rotates slightly.
- Remove the key and fit the plugs again; the gate will automatically stop once back in its original position or
once the motor will be started.
• Every month check the good operation of the emergency manual release.
• It is mandatory not to carry out extraordinary maintenance or repairs as accidents may be caused.
These operations must be carried out by qualified personnel only.
• The operator is maintenance free but it is necessary to check periodically if the safety devices and the other
components of the automation system work properly. Wear and tear of some components could cause
dangers.
If the product must be dismantled, it must be disposed according to regulations in force regarding the diffe-
rentiated waste disposal and the recycling of components (metals, plastics, electric cables, etc..). For this
operation it is advisable to call your installer or a specialised company.
All Benincá products are covered by insurance policy for any possible damages to objects and persons
caused by construction faults under condition that the entire system be marked CE and only Benincá parts
be used.
18
Safety rules
Manual and emergency operation
Maintenance
Waste disposal
Warning
User's handbook
C
T
Publicidad
Tabla de contenido
