koban KMD 50000 Manual De Instrucciones página 134

True RMS
Digital Multimeter User Manual
AC True RMS
The term stands for "Root-Mean-Square," which
represents the method
of calculation of the voltage
or
current
value. Average responding multimeters
are calibrated to read correctly only on sine waves
and they will read inaccurately on non-sine wave or
distorted signals. True rms meters read accurately
on either
type
of signal.
_
ACV Bandwidth
50Hz to 20000Hz
Display
50,000 count TFTLCD
Overrange indication
"Ob' is displayed
Auto Power Off
5-30minutes (approximately) with disable feature
Polarity Automatic (no indication for positive); Minus (-)
sign for negative
_
Measurement Rate
20 times per second, nominal
Low Battery Indication
"
g
"
is displayed
if
battery voltage drops below
operating voltage
One 7.2 volt (MEDA 1604) battery Battery
mA, fjl\ ranges;
0.8A/1 000V ceramic fast blow A
range; 1
0A/1
000V ceramic fast blow
Fuses
Operating Temperature 5°C to 40°C (41 °F to 104°F)
Storage Temperature
-20°C to 60°C
(-4 Ft0 140 F)
Operating Humidity
Max 80% up to 87°F (31 °C) decreasing linearly to
Storage Humidity
50% at 40°C (104°F)
Operating Altitude
<80% 7000ft. (2000meters) maximum.
Safety
This
meter
is intended for origin of installation use
and protected, against the
users, by double insulation per EN61 01 0-1
and IEC61 010-1 2nd Edition (2001)
to
Category IV 600V and Category III 1000V; Pollution
Degree 2. The meter also meets UL 61010-1
,
2nd
Edition (2004),
CAN/CSA C22.2 No.
61010-1 2nd
Edition (2004), and UL 6101 0B-2-031
, 1 st
Edition (2003)