Assembly Instructions; Hopper Installation; Wheel Installation; Move The Shredder - KPC BK 500 S Manual De Instrucciones

7 ASSEMBLY INSTRUCTIONS

7.1

Hopper installation

7.2

Wheel installation

! Lift the machine a little, and reeve the wheel with the wheel shaft.
! Reeve a washer, and insert a pin to fix.
! Repeat above processes to install another wheel
7.3

Move the shredder

! Stand at the back of shredder
! Grab the hopper handle, and step on the wheel axle.
! Pull down the handle to slant backward the shredder.
! Move the shredder.

8 BEFORE STARTING ENGINE

8.1

Oil

! Use a high quality detergent oil classified "API service category SE or SF".
! SAE 10W-30 is recommended for general use. Other viscosities shown in the chart may be
used when the average temperature in your area is within the indicated range.
! Do not use special additives.
8.1.1

Oil capacity

The engine holds approximately 0.55 litres.
! Carefully lift up the hopper
! Place and align the hopper on top of the
hopper seat.
! Locate the screw to secure the hopper with
the base unit.
P a g e | 8
EN