Publicidad
Idiomas disponibles
Idiomas disponibles
junctions may be tested in the same manner described above as emitter-base and
base-collector junctions are diode junctions.
When measuring continuity (also for shorted diodes) the meter emits a
continuous tone when the resistance value falls below 50Ω.
RANGE
HOLD REL
MENU
concurrently. To deactivate a function, press the MENU key to engage the menu
and continue pressing to move the cursor in front of the desired (active) function.
Then press CLEAR to deactivate. Press CLEAR twice to deactivate all active
functions. Turning the function/range selector also deactivates all menu functions.
Note: "Relative Mode" is the only menu function available with "Diode Junction
Test". All menu functions are available for all other measurement functions.
Display Backlight Button: Model HD160B has Digi-Glo
backlighting, one of the best backlights available in the industry. This
button turns the backlight on and off. To conserve battery life,
backlight will automatically turn off after approximately 60 seconds.
Locks the currently displayed range. Each subsequent push of
RANGE
the button moves to a higher range. From highest range the meter
returns to the lowest range. The meter functions in the 4000 count mode when
range is locked.
Probe Hold keeps the measurement on the display for later
HOLD
viewing (even after test leads are removed from circuit). Select HOLD
before taking a measurement. The meter beeps to indicate that a stable
measurement has been recorded.
MENU FUNCTIONS
MAX MIN
SELECT
CLEAR
RANGE LOCK
PROBE HOLD
- 12 -
Press the MENU key to engage the
menu (menu bar flashes) and
continue pressing to move the cursor
(
) to the desired function. Press
SELECT to activate the function (the
selection remains displayed, while the
non-selected items continue flashing
for a few seconds and then turn off).
Several functions can be selected
TM
TM
Publicidad
