Descargar Imprimir esta página

Relative Mode; Auto-Power Down; Incorrect Input Warning; Safety Test Leads - Wavetek Meterman HD160B Manual De Instrucciones

Multímetro digital robusto con selección automatica de escala

Publicidad

Idiomas disponibles

Idiomas disponibles

Take a measurement first and then activate Relative Mode,
REL
while the measurement is displayed. The measurement is stored as
reference value and the display is reset to zero. The reference value is now
deducted from subsequent measurements and only the difference is displayed.
MAX MIN
current value. The meter beeps each time a new MIN or MAX value is recorded.
"Auto Min Max" is fully autoranging for best resolution and updates every time
the display changes by one or more counts. To view the recorded values, engage
the menu with the MENU key and move the cursor to MAX MIN. Continue
pressing the SELECT key to view max values (only MAX displayed in menu bar)
and min values (only MIN displayed in menu bar). To view recorded min/max
resistance values, short the test leads together. "Auto Power Down" is disabled
when MAX MIN is enabled.
In order to save battery life, your multimeter powers down automatically after
approximately 30 Minutes of inactivity. You can turn it back on by simply
pressing the menu button, or by turning the function selector switch to OFF and
back to a measuring function. The instrument does not power down while in Auto
Min Max mode.
The meter displays a function error code "FErr" when a test lead is placed in the
10A input jack and the Selector switch is not set to current. (If the DMM is
connected to a voltage source with leads set for current, very high current could
result). All current ranges are protected with fast acting fuses.
The test leads included with your meter have shrouded banana plugs to eliminate
the possibility of shock if the plugs accidentally pull out of the meter while making
a measurement. The test leads also have insulated probe tips to avoid causing
shorts when making measurements in dense component areas. Replacement part
number for Safety test leads is TL245.

RELATIVE MODE

AUTO MIN MAX
Records the minimum and maximum values of both
positive and negative polarity input signals, while displaying the

AUTO-POWER DOWN

INCORRECT INPUT WARNING

SAFETY TEST LEADS

TM
- 13 -

Publicidad

loading