Ottobock FIT KIT Manual De Instrucciones página 7

How to use the FIT KIT?
Choose a suitable product in terms of size and side for your patient.
Place the AFO in the patient's shoe, preferably under any removable insole.
Apply the shoe and product onto the patient.
Let the patient walk a short distance and evaluate the effectiveness of the
AFO.
If the desired effectiveness is not yet achieved, you can work with the
enclosed heel or forefoot elevating elements in order to obtain better
results. In case of supination or inversion of the forefoot, a lateral pronation
cable which is included may be advisable in addition.
If the result is positive, fit the patient with the appropriate size of a WalkOn
Reaction .
plus
If the patient needs an orthosis with less support, choose the 28U24 WalkOn Reaction with a
slightly lower knee extension moment, or a classic 28U11 WalkOn or a 28U23 WalkOn
Trimable (a classic WalkOn but with a rubber sole attached to the footplate), or a more flexible
orthosis such as the 28U22 WalkOn Flex.
(WalkOn / WalkOn Trimable FIT KIT, article number 28T1N; WalkOn Flex FIT KIT, article
number 28T2; WalkOn Reaction FIT KIT, article number 28T3)
Note
Since the test model is often not fully adapted to the patient, some pressure may be experi-
enced at the medial malleolus during use. This is remedied by an individually adapted orthosis,
grinding or cutting according to the fitting instructions, (see the product instructions for use).
Art. no
28U25=L/R 36-39
28U25=L/R 39-42
28U25=L/R 42-45
28U25=L/R 45-48
Side
Left/Right
Left/Right
Left/Right
Left/Right
Shoe Size
36-39
39-42
42-45
45-48
WalkOn Reaction
plus
Height
35 cm / 13,8 inch
36 cm / 14,2 inch
37,5 cm / 14,8 inch
39 cm / 15,4 inch
FIT KIT | Ottobock 7