Battery Cover - Advanced Bionics NEPTUNE Manual De Uso

Battery Cover

Battery Covers provide an airtight seal and allow use of your Neptune sound
processor while swimming or bathing. A Battery Cover should be in place on your
sound processor at all times during Neptune use.
To attach the Battery Cover:
1.
Hold the sound processor in one hand, with AAA battery installed.
2.
Align the edges of the battery cover with one end of the sound processor housing.
Note that the battery cover is not 'sided.'
3.
Push the battery cover onto one end of the sound processor then push fi rmly onto
the other end to attach.
To remove the Battery Cover:
1.
Hold the sound processor in one hand.
2.
Firmly grip the ends of the Battery Cover and, starting at one end, pull it away
from the sound processor.
Do not insert your fi ngernail or any tool into the Battery Cover in an attempt to
remove it from the processor as this may damage the battery seal allowing water
and debris to enter into the Neptune battery compartment.
If damage to the Battery Cover is noted or suspected, replace prior to resuming
water-related use of the Neptune System.
For additional information, refer to the 'Instructions for Use' included with your
Neptune Covers.
32 User Guide for the Neptune™ Sound Processor