Select The Fold Type; Set-Up Instructions - Hefter Systemform TF M-Serie Manual De Instrucciones

https://www.supplychimp.com
3. WORKING WITH THE MACHINE

3.3. Select the fold type

The TF M series has two
fold pockets!
¾
Position marker A for
the first fold pocket
(incl. closing pusher)
Vernier adjustment A
¾
Position marker B for
the second fold pocket
(incl. closing pusher)
Vernier adjustment B
To change the fold pocket position; first push the position marker A or B down
(Quick adjustment, see point 2.1.).
Now you can adjust the position, depending on the required fold type (acc. to the
scale) (also see under point 3.4)
For just one folding (e.g. single fold) the position marker A is turned completely to the
right side (up to the symbol <).
To fix the fold pocket position release the closing pusher (= locked). The position
marker have to snap in complete (flush with the front cover).
NOTE: During the changing process of the fold pocket position marker no paper may
be in the folding wheel!

3.4. Set-up instructions

Pos. Feeding
instruction
3.4.1.
3.4.2.
3.4.3.
3.4.4.
3.4.5.
Paper Fold
size type
Letter Wrap
fold
Letter Z fold
Lettter Single
fold
Legal Double ­
parallel
fold
Letter Door fold
B
Address Position
position lever, fold
pocket 1
A
Position
lever, fold
pocket 2
10